Halo H995RICAT 4" IC AIR-TITE LED Dedicated Remodel Housing

The Halo H995RICAT is a dedicated LED remodel small aperture IC AIR-TITE housing for use with Halo RL4 Series LED modules. It is designed for installation into existing insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE housing designed to prevent air flow between occupied spaces and unconditioned areas.

Compatible Trims & Module (Sold Separately):

• HLBT407FS5
• RSQ4LS9FSD2W1EWH
• RA4LS9FSD2W1EWH
• SMD4R69SWH
• LA4069271EWH
• LT4099FS1EWHR
• LT4069FS1EWHR
• ML4LSFS1ERMB

Features

• Recessed Size: 4"
• Voltage: 120V
• Slide-N-Side™ wire traps
• Quick Connect wiring connectors included in junction box
• AIR-TITE™ per ASTM E283
• Die-formed housing
• Remodel springs accommodate 1/2" and 5/8" ceiling material
• Compatible with Halo RL460 Series LED modules

Documents

• Spec Sheet

Labels and Listings

• cULus Damp Location Listed
• cULus Listed for Wet Location, covered ceiling, with select trims 
• Use with designated Halo LED systems for ENERGY STAR® certification
• Can be used for State of California Title 24 high efficacy compliance with designated Halo LED lighting systems
• Can be used for International Energy Conservation Code (IECC) high efficacy compliance with designated Halo LED lighting systems
• Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential