Halo H2750ICAT 6" LED IC Air-Tite New Construction Housing

The Halo H2750ICAT is a dedicated 6-inch aperture LED new construction shallow IC AIR-TITE housing for use with Halo RL7 and RL56 Series LED modules, and ML56 Series LED modules when used with ML56 shallow trims. H2750ICAT is designed for use in insulated ceilings where it will be in direct contact with insulation.

Compatible Trims (Sold Separately):

• RA56LS9FSD2W1EWH
• RL56069FSD2W1EWH
• RL56LS9FSD2W1EWH
• LTSS56079FS1EWHR

Features

• Trim and LED module sold separately
• Recessed Size: 6"
• Voltage: 120V
• Got Nail! bar hangers
• Pass-N-Thru tool-less shortening of bar hangers
• Slide-N-Side wire traps
• Quick Connect wiring connectors included in junction box
• AIR-TITE per ASTM E283
• Die-formed housing and plaster frame
• Housing may be removed from plaster frame for junction box access
• Compatible with Halo RL560, LED modules and ML56 Shallow LED trims
• Designed for use in insulated ceilings where it will be in direct contact with insulation

Documents

• Spec Sheet

Labels and Listings

• cULus Listed damp location
• cULus Listed for wet location, covered ceiling, with select trims 
• Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential (with ceiling gasket GA-ATH7-6PK or caulk).
  
• Use with designated Halo LED systems for ENERGY STAR® certification 
• Can be used for State of California Title 24 high efficacy compliance with Title 20 Certified Halo LED
• Can be used for International Energy Conservation Code (IECC) high efficacy compliance with designated LED modules and trims
  
• RoHS compliant