Halo H99RTAT 4" Non-IC AIR-TITE Remodel Housing

The H99RTAT is a small aperture Non-IC AIR-TITE™ housing for providing accent and task lighting. The H99RTAT is designed for use in non-insulated existing ceilings. Non-IC Housing is AIR-TITE™ but insulation must be kept 3 inches away from all sides of housing. For installation from below the ceiling.

Compatible Trims (Sold Separately):

• HLBT407FS5

Features

• Trim and LED module sold separately
• Recessed Size: 4"
• Socket: Fixed position porcelain socket
• Type: Non-IC Rated Remodel
• Voltage: 120V
• Quick Connect wiring connectors included in junction box
• AIR-TITE
• Thermally protected
• Die-formed housing
• Remodel springs accommodate 1/2" and 5/8" ceiling material
• NM cable pryouts and conduit knockouts in junction box

Documents

• Spec Sheet

Labels and Listings

• cULus Damp Location Listed
• cULus Listed for Wet Location, covered ceiling, with select trims
• Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential 
• RoHS compliant
• IP rated (Improper Lamp)