What is the listing required for fire rated led recessed housings

When it comes to fire-rated LED recessed housings, the specific requirements may vary based on the jurisdiction and local building codes. However, here are some general considerations for fire-rated LED recessed housings:

1. Fire Rating: The recessed housing should have a fire rating that meets the minimum requirements set by the local building codes. This rating indicates the ability of the housing to resist the spread of fire for a specified period, such as 30, 60, or 90 minutes.
2. UL Listing: Look for LED recessed housings that are UL (Underwriters Laboratories) listed for fire resistance. UL is a widely recognized testing and certification organization that evaluates the safety and performance of various products.
3. Construction Materials: The housing should be constructed using fire-resistant materials that can withstand high temperatures. Typically, fire-rated housings are made of steel or other non-combustible materials.
4. Intumescent Gaskets: Intumescent gaskets are important components of fire-rated housings. These gaskets expand when exposed to heat, forming a seal between the housing and the ceiling to prevent the spread of flames and hot gases.
5. IC-Rated: Look for housings that are IC-rated (Insulation Contact) if the recessed lights will come into contact with insulation. IC-rated housings are designed to be safely installed in direct contact with insulation without posing a fire hazard.
6. Airflow Restriction: Fire-rated housings often have airflow restriction requirements to maintain the fire rating. Follow the manufacturer's guidelines for any restrictions on the amount of insulation or airflow around the housing.
7. Compatibility with LED Retrofit Kits: Ensure that the fire-rated housing is compatible with the LED retrofit kits or LED trims you intend to install. Check the manufacturer's specifications or consult with a professional to ensure compatibility.

Remember, it is crucial to consult the local building codes and regulations in your specific area to ensure compliance with the required standards for fire-rated LED recessed housings.