Track & Accessories

Specifications System H System Track Circuit One Circuit Finish White, Black, Silver Length (inch) 2.76 Width (inch) 1.44 Height (in...

One circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and ...

One circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and ...

One circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and ...

Feed power to the connector from surface or from directly above. Features Finish: Matte Black For feeding power from surface conduit with 1/2 -14...

Features Finish: Black, White, Silver Mounts to a 4" or 3" octagon outlet box Canopy can be placed anywhere along the track run to supply power D...

One circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and ...

Mounts to any point along track (excluding track mounting hole locations) for power feed from 3" or 4" octagonal j-boxes. Track must be mount 45 to...

Invisible spline for joining two Radius track sections. Features Finish: White, Black  Polarized Live End For use with Radius track only. Mini Co...

Electrifies track from the beginning of the run.  Features Finish: Matte Black Polarized Live End Has an integral thread that accepts a standard ...

Radius T-bar canopy includes Live End. Suspended ceiling feed. Features Finish: Matte White, Use T-Bar canopy to feed power to the track when in...

Includes 15' 2-conductor cord and plug set with in-line switch. Capacity 7 amps at 120V. Features Finish: Matte Black It energizes track from a p...

From Lightolier, this Live End Canopy feed mounts directly under a 4-inch or 3-inch octagonal outlet box. Features Finish: Matte Black Includes L...

Adjusts from 90° in both directions. Not a power feed point. Features Finish: Matte Black Pre-wired and polarized connector. Polarity tab must po...

The connector is used to create a "T" pattern with the Radius track. Features Finish: Matte Black Power may be fed into the connector using a sta...

For use with Feed L/In-Line and "T" connector. Features Finish: Matte Black Mounts directly on connector.  Mounts to a 4" or 3" octagon outlet bo...

Features Bezel shade only. Adapter sold separately. Finish: Matte Black, Matte White Wattage: 75W max Bulb Type: PAR30 Mounting: All Lytespan Tra...

Features Bezel shade only. Adapter sold separately. Finish: Matte Black Wattage: 60W max Bulb Type: PAR16 Die-cast aluminum

"L" connector for use with Lytespan's Basic one circuit track system Features Finish: Aluminum The "L" connector is polarized and pre-wired. It ma...

The end feed connector feeds trac from above with a flexible conduit, B...

The end feed connector feeds trac from above with a flexible conduit, B...

For use with Stem Mounting Kits. Features Finish: Matte White, Matte Black Covers wiring from stem to Power Feed Connector. 12 1/4" long by 1 1/8"...

Features Finish: Matte White Length: 48" Stems for Radius track cannot be field cut Stems cannot be mounted directly to track connectors Canopy d...

Features Finish: Matte Black Length: 36" Stems for Radius track cannot be field cut Stems cannot be mounted directly to track connectors Canopy d...

The connector is polarized and pre-wired. The connector adjusts to create a 90 or straight track pattern. Features Finish: Matte Black Includes b...

Features Finish: Matte Black Powers one Lytespot  Includes 8' cord and plug, built-in switch Note: Not compatible with Power Jacks, Lyteflood 39, ...

Supports core mounted fixtures of up to 10 lbs. And stem or chain mounted fixtures of up to 25 lbs.  Features Finish: Zinc Set of 9 For use with R...